It's Your Special Day

Hello Everyone!!
Good morning....

Here is my third inspirational post of this week. In this I create pocket to add tags and photos.  This is my first card using Arianna Blooms flowers.  I added lots of close shots of flowers below. Hope you like.

HC PRODUCTS USED:
Deluxe Flower Shaping Paper Pack 50
3D Purr-fect Posies Shaping Mold
Purr-fect Posies Die
Purr-fect Posies Cling Stamp Set
HCFB1 467 3d Leafy Accents Shaping Mold
HCPC 3835 Leafy Accents Cling Stamp Set
HCD1 7193 Leafy Accents Die
DMCT4185 Groove Golf Tool Set
HCST1-401 Deluxe Flower Shaping Kit
HCDA2-450 Stack and Store Daubers-Pack of 30
HCS1 459 1 Assorted Pearl Stamens Small
DDC08 Designer Dries Clear Adhesive Refill
RACP985 Ranger Archival Ink Cactus Flower
RACP436 Ranger Archival Ink Leaf Green
RACP614 Ranger Archival Ink Pad Magenta Hue
RACP475 Ranger Archival Ink Pad Library Green
HCDP1 287 Lush Lilac Paper Collection
Window scene paper collection
Swirly Accents Spray Die
PGM15015 Rajni Chawlas's Crystal Clear
HCPC 3608 Arianna Blooms Cling Stamp Set
HCD1 748 Arianna Blooms Die
Eyelet Circle & Basics Small Die
Rounded Eyelet Lattice Die
HCCB1- 482 Swing Card- White
HCD1-7272 Rounded Sunlight Window Die
HCD1-7272 Rounded Sunlight Window Die

INSTRUCTIONS:
Ready card measures 6”× 6.75”
First cut a strip from white cardstock measures 1”×6”. Score on half inch and fold it . Glue it with card to make a square pocket. Cut a card mat from designer paper collection and measures 5 7/8”× 5 7/8” .Adhere it on pocket. Cut top edge of pocket using Swirly Accents Spray die.  Take a white cardstock measures 5 7/8” × 7”. Cut a card mat from designer paper collection of same size and mat on cardstock.  Cut top edge using Swirly Accents Spray die.  Cut border from white cardstock using Swirly Accents Spray die and glue it on card mat. Put this card mat in card pocket.

Cut a round piece of designer paper collection using Rounded Sunlight window die. Adhere it inside circle of card. Cut a half round Decorative piece from white cardstock using Rounded Eyelet Lattice die.  Glue it inside the card to create a pocket as shown.  Cut a round piece from designer paper collection and mat it on front circle.  Cut a round dolly from white cardstock using Rounded window frame die and glue it using dimensional tape. Cut eyelet circle from designer paper collection using Eyelet Circle & Basics small die. Mat it on round dolly.

Stamp arianna blooms flowers using cactus flower ink on deluxe flower shaping paper and cut with coordinating die. Also stamp some posies flowers using same ink and cut with coordinating die . Paint flowers with cactus flower ink and majestic Violet ink. Shape flowers using groove tool. Layer flowers and add stamens. Stamp Leafy Accents leaves and Posies leaves using library green ink and cut with coordinating dies. Paint leaves with leaf green and library green ink. Shape them in molds. Arrange flowers and leaves and glue them using hot glue. Cut a sentiment  strip from designer paper collection and mat it on white cardstock. Glue sentiment on card using dimensional tape. For finished look apply glitter using clear dry adhesive. 

That's all for today

Thanks for stopping by 

Hugs 

Uma

With Love

Hello Everyone!

Good Morning.......
Happy wednesday to all of you!. Here I am back with another card using "Cottage Garden" collection.  Really love this window.

HC PRODUCTS USED :
HCD1-7278 Cottage Garden Hydrangea Die
HCD1-7279 Fresh Cut Hydrangea Die
HCD1-7280 Cottage Window & Hydrangea Die
HCPC-3900 Cottage Garden Hydrangea Cling Stamp Set
HCPC-3901 Fresh Cut Hydrangea Cling Stamp Set
HCPC-3902 Cottage Window & Hydrangea Cling Stamp Set
HCDP1-2111 Cottage Garden Paper Collection
HCFB1-489 3D Hydrangea Shaping Mold
 Elegant Pocket Accents Die
Ticket and Tags Die
HCDA2-450 Stack and Store Daubers-Pack of 30
HCS1 460 Bridal Bouquet Stamens Small
159723 Designer Dries Clear Adhesive
RACP468 Ranger Archival Ink Pad Jet Black
RACP454 Ranger Archival Ink Pad Manganese Blue
RACP482 Ranger Archival Ink Pad Olive
RACP436 Ranger Archival Ink Leaf Green
Zig markers
Deluxe Flower Shaping Paper Pack 50
PGM15015 Rajni Chawlas's Crystal Clear

OTHER PRODUCTS:
White cardstock, watercolor paper, acetate sheet, dimensional tape, satin cord, Distress ink(old jeans, thermocol dome 1”

VIDEO LINKS

INSTRUCTIONS:
Ready side fold card measures 6.25”×8”
First, cut a card mat from designer paper collection measures 6”× 7 ¾” .Distress the edges of the card mat and mat it on card base. Tear bottom edge and roll it , add a small die cut piece.  Cut another mat from same designer paper collection measures 6”×7”, cut one edge using Elegant Pocket Accent die.  Adhere it on card using dimensional tape.  Cut a border from white cardstock using Elegant pocket Accent die and glue it on bottom edge as shown . Stamp window image on white cardstock using coffee ink and cut with coordinating die.  Paint image with same ink. Cut a acetate sheet and glue it from back side of window.  Glue window on card using dimensional tape.

Stamp images on watercolor paper using black archival and paint with zig markers.  Cut with coordinating dies.  Stamp some hydrangea flowers using manganese blue and cut with coordinating die.Paint flowers using old Jean’s distress ink and shape using shaping mold.  Glue flowers on dome shape thermocol to create a hydrangea flower. Stamp classic rose leaves on deluxe flower shaping paper using olive green archival and cut with coordinating die. Paint leaves with leaf green archival and olive green archival. Shape leaves using shaping mold.  Arrange leaves and flower using hot glue. Also glue more painted images as shown in the picture.  Cut a sentiment tag from designer paper collection and add satin cord. Glue sentiment on card using dimensional tape.  For finished look apply glitter using designer clear dries adhesive.

Thanks for stopping by
Hugs
Uma

Interlocking Anniversary Card

Hello Crafty Folks!

Happy Wednesday....
It's inspirational Wednesday and here I am back with my another creation. This time I create a interlocking card for anniversary. I used tulip flowers by Heartfelt Creation and leaves from Cherry Pansy .

HC PRODUCTS USED :
HCCB1-483  6” × 6” Interlocking Card – White
HCPC- 3858 Tulip Time Stamp
Tulip Time Die
HCPC-3862 Cheery Pansy Stamp
3D Pansy Shaping Mold
Cheery Pansy Die
Window Scene Paper Collection
Wild Aster Paper Collection
Celebrate Love Sentiments Cling Stamp Set
DMCT4185 Groove Golf Tool Set
HCST1-401 Deluxe Flower Shaping Kit
HCDA2-450 Stack and Store Daubers-Pack of 30
HCS1 459 4 Rock Candy Stamens Small
DDC08 Designer Dries Clear Adhesive Refill
RACP985 Ranger Archival Ink Cactus Flower
RACP436 Ranger Archival Ink Leaf Green
RACP494 Ranger Archival Ink Pad Majestic Violet
RACP475 Ranger Archival Ink Pad Library Green
PGM15015 Rajni Chawlas's Crystal Clear
HCPC- 3889  Wild Aster Scroll & Cluster Stamp
HCD1-7259 Wild Aster Scroll & Cluster Die
HCD1-7154 Eyelet Circle & Basics Small  die
HCD1-7201 Ticket and Tags Die
HCD1-7271 Rounded Window Frame Die
HCD1-7272 Rounded Sunlight Window Die
HCD1-7273 Rounded Eyelet Window Die   
HCD1-7274 Rounded Lattice Window Die 
HCDP1-2109 Window Scenes Paper Collection
Deluxe Flower Shaping Paper 2019

OTHER  PRODUCTS:
Smooth white cardstock, satin cord, dimensional tape, magnets,   flower center prills

VIDEO LINKS

INSTRUCTIONS:
Ready card measures 6”×6”
First take a white interlocking card and cut inside card mat from designer paper collection measures 5.7/8” × 5.7/8”. Distress edges with cactus flower ink and adhere it to ready card base. Cut 4 circles using Rounded window frame die. Cut all circles into half, distress edges with cactus flower ink and mat them on card flaps. Before mating I glued 2 magnets on 2 flap on outside. Cut Half circle decorative die cuts from white cardstock using dies. Distress die cuts with cactus  flower ink and mat them as shown. Cut 2 circle frame from white cardstock using Eyelet Circle & Basics Small die. Glue both inside the card to make a window scene.
Stamp image from Wild Aster Scroll & Cluster stamp on white cardstock using cactus flower ink and library green ink and cut with coordinating die. Paint image with cactus flower ink and leaf green ink. Slightly emboss flowers and add flower center pearls. Glue it on circle frame inside the card. Cut a strip from white cardstock using ticket and tags die. Stamp sentiment from celebrating love sentiment stamp on strip using cactus flower ink.  Trim strip from one side and glue it inside the card using dimensional tape as shown in the picture. Add crystal clear on flowers and circle frame using glue that dries clear .
Cut half round diecuts from white cardstock using dies. Distress them with cactus flower ink and adhere it on all flaps as shown.  To create magnetic dolly closer, first cut a circle from white cardstock using largest die from Eyelet circle & Basics small die. Glue magnets on it. Cut a dolly from white cardstock using die and adhere it on magnet circle using dimensional tape. Cut a round piece from designer paper using Eyelet circle & Basics small die. Mat it on center of dolly. Further, cut a small dolly from white cardstock using die and mat it on big dolly using dimensional tape. Cut a circle from designer paper and mat on center of small dolly. Cut a white cardstock using same circle die, stamp sentiment from celebrating love sentiment using cactus flower ink and trim it. Mat it on center of small dolly using dimensional tale as shown.
For Flowers, stamp tulip flowers using cactus flower ink on deluxe flower shaping paper and cut with coordinating die. Sponge flowers using majestic Violet ink and cactus flower ink. Shape flowers using groove tool and layer it. I use 3 layers for one flower .Add Rock Candy stamens small to the center of flowers. Stamp Cheery Pansy leaves using library green ink on deluxe flowers shaping paper.Cut with coordinating die and paint with leaf green archival. Shape leaves using shaping mold.  Glue flowers and leaves on card using hot melted glue. Tie a bow using satin cord and glue it as shown. For finished look apply crystal clear on flowers using glue that dries clear

Best Wishes

Hello Everyone!

Today I'd like to share a card using "Calla Lily" Collection by Heartfelt Creation . I coordinate these beautiful calla lilies and swan with "Adorn It Pocket Accents" die. Hope you like this coordination.

HC PRODUCTS USED:
HCD1-7157 Eyelet Oval &Basics Large DieHCD1-7201 Tickets and tags Die
HCD1-7203 Ornamental Tags Die
HCD1-7245 Adorn it Pocket Accents Die
HCD1-776 Eyelet Oval Die
HCD1-7277 Swan Lake Die
HCD1-7275 Calla Lily Die
HCDP1-2110 Calla Lily Paper Collection
HCPC-3899 Swan Lake Cling Stamp Set
HCPC-3897 Calla Lily Cling Stamp Set
HCFB1-484 3D Calla Lily Shaping Mold
HCS1-485 Pastel Pollen Stamens – Medium
PGM15015 Rajni Chawlas's Crystal Clear
RACP436 Ranger Archival Ink Leaf Green
RACP482 Ranger Archival Ink Pad Olive
RACP632 Ranger Archival Ink Pad Buttercup
Zig markers

OTHER PRODUCT'S:
Smooth White Cardstock, Satin Cord, Dimensional tape, hot melted glue

VIDEO LINKS:

INSTRUCTIONS:
Ready side fold card measures 6.25”×7.5"
First, cut a card mat from designer paper collection measures 6”×7.25”. Adhere it on ready card base. Cut another card mat from same designer paper collection measures 5.75”× 7” , adhere it on white cardstock which is 1/8 of an inch bigger from all four sides. Mat it on card base using dimensional tape. Cut 2 pieces of white cardstock using Adorn it pocket Accents die, glue it on card using dimensional tape. Cut a white cardstock using Eyelet Oval die and a piece of designer paper using die. Distress Eyelet Oval die cut using Buttercup ink . Mat base oval piece of designer paper on it. Glue this oval piece on card using dimensional tape.

Cut a frame from white cardstock using Eyelet Oval & Basics Large dies.  Add glittering it using clear dry adhesive. Stamp a swan image on watercolor paper using black archival and cut with coordinating die.  Paint image with zig markers.  Glue it on the frame using dimensional tape.

Stamp calls lily flowers on deluxe flower shaping paper using Buttercup ink and cut with coordinating die. Paint flowers with buttercup and leaf green ink. Shape using shaping mold and add stamens.  Stamp leaves on deluxe flower shaping paper using olive green ink and cut with coordinating die. Paint leaves with leaf green and olive green archival. Shape using shaping mold.  Arrange flowers and leaves and glue with hot melted glue. Cut 2 sentiment tags from designer paper collection using dies and tie a cord. Glue using dimensional tape as shown.  For finished look apply crystal clear on flowers using designer clear dries adhesive.

Thanks for stopping by 

Hugs

Uma

Step Into My Garden

Hello Crafty Folks!

Happy Wednesday,

Here is one more card using Cottage Garden Collection

HC PRODUCTS USED:
HCD1-7278 Cottage Garden Hydrangea Die
HCD1-7279 Fresh Cut Hydrangea Die
HCPC-3900 Cottage Garden Hydrangea Cling Stamp Set
HCPC-3901 Fresh Cut Hydrangea Cling Stamp Set
HCDP1-2111 Cottage Garden Paper Collection
HCFB1-489 3D Hydrangea Shaping Mold
PGM15015 Rajni Chawlas's Crystal Clear
RACP454 Ranger Archival Ink Pad Manganese Blue
RACP614 Ranger Archival Ink Pad Magenta Hue
RACP436 Ranger Archival Ink Leaf Green
RACP482 Ranger Archival Ink Pad Olive
RACP468 Ranger Archival Ink Pad Jet Black
Zig markers
DDC08 Designer Dries Clear Adhesive Refill
HCS1 460 Bridal Bouquet Stamens Small
HCDA2-450 Stack and Store Daubers-Pack of 30
HCFB1-462 3D Rose Shaping Mold
Deluxe Flower Shaping Paper Pack of 50 - White
HCD1-7110 Classic Rose Die
HCPC-3752 Classic Rose Cling Stamp Set
Fanci-Fold Pocket & Accents Die
Petite Pocket Accents Die

OTHER PRODUCTS :
White cardstock, watercolor paper, dimensional tape, satin cord, organza ribbon, thermocol dome(1”) ,

VIDEO LINKS
For more tips on creating with the Cottage Garden Collection watch the tutorial at https://youtu.be/faBoB2s49RI.

INSTRUCTION :
Ready top side fold card measures 8.5"×6.5"
First cut a card mat from designer  paper collection measures 8.25”×6.25” and mat it on ready card base. Cut a designer paper measures 7”×5” to create window scene. Further, cut another mat from same collection measures 8”×6”. Adhere it on white cardstock which is 1/8 of an inch bigger from all four sides. Cut a window using Petite pocket Accents die Mat it on card using dimensional tape. Cut 2 designer borders from white cardstock using Petite Pocket Accents die and glue it on window as shown in the picture.

Stamp hydrangea flower on deluxe flower shaping paper using manganese blue ink Cut with coordinating die.  Paint flowers using manganese blue and magenta hue ink . Shape with shaping mold.  Stamp classic rose leaves using olive green archival on deluxe flower shaping paper and cut with coordinating die. Pierce the center and add stamens. Paint leaves using leaf green archival and olive green archival. Shape leaves using shaping mold. Glue flowers on dome shape thermocol . Create 2 hydrangea like this. Arrange leaves and hydrangea flower in lower side of card as shown in the picture. Cut 2 corner from white cardstock, trim corner die cuts and glue on card as shown.

Stamp bird stamp on water color paper and paint with zig markers. Stamp 2 times. Cut with coordinating die. Arrange image on top side of window using dimensional tape as shown. Add few hydrangea flowers on it.  Cut a sentiment strip from designer paper collection and mat it on white cardstock.  Tie bow using orange ribbon and satin cord. Glue bow and sentiment strip. For finished look apply frosting powder using designer clear dries adhesive.

Thanks for stopping by
Hugs
Uma

Wishful Hydrangea

Hello Everyone!

Happy Wednesday

Today, is the debuting day of "Cottage Garden" collection.  Here is my first take using this beautiful collection.

PRODUCTS USED:
HCDP1-7278 Cottage Garden Hydrangea Die
HCPC-3900 Cottage Garden Hydrangea Cling Stamp Set
HCDP1-2111 Cottage Garden Paper Collection
HCFB1-489 3D Hydrangea Shaping Mold
RACP482 Ranger Archival Ink Pad Olive
DDC08 Designer Dries Clear Adhesive Refill
352854 Metal Tip for Adhesive Bottles
PGM15016 Rajni Chawlas's Frosting Powder
HCDA2-450 Stack and Store Daubers-Pack of 30
HCD1-7271 Rounded Window Frame Die
Elegant Pocket Accents Die
HCD1-755 Circle Basics Large Dies
Leaf Green Archival
Aquarium Archival
Buttercup Archival

OTHER  PRODUCTS :
White cardstock, half cut pearl, hot melted glue

VIDEO LINKS
For more tips on creating with the Cottage Garden Collection watch the tutorial at https://youtu.be/faBoB2s49RI.

INSTRUCTIONS:
Ready tent fold card measures 8”×6”
First choose a card mat from designer paper collection and cut a piece measures 7 7/8”×5 7/8” . Adhere it on ready card base. Further  choose another paper from same designer paper collection and cut a piece measures 5 7/8” × 7.5" .Mat it on white cardstock  Cut 2 edges from long side using Elegant pocket Accent die. Adhere it on card using dimensional tape.  Cut 2 border from white cardstock using Elegant Pocket Accent die and glue them on both edges.  Now cut a decorative dolly die cut from white cardstock using Rounded Window Frame die. Mat it on center of card using dimensional tape. Cut a circle piece from designer paper collection using largest die from Circle Basics & Large die. Mat ir on decorative dolly.
Stamp big hydrangea flower on white cardstock using leaf green archival and cut with coordinating die.  Paint leaves using leaf green archival and add more shading using online green archival.  Stamp small hydrangea flowers on deluxe flower shaping paper using aquarium ink and cut with coordinating die. Paint flowers using Buttercup ink and aquarium ink. Shape flowers using 3d shaping mold. Glue flowers on big hydrangea flower Glue this flower on card as shown in the picture.  Cut  a sentiment from designer paper collection and mat it on white cardstock. Adhere sentiment on card using dimensional tape. For finished look apply glitter on flowers and add some half cut Pearl.

Thanks for stopping by
Hugs
Uma